Steam A Seam 2 – 24″ wide

24 inches wide – sold by the 25cm increment

25cm – A quantity of 1
50cm – A quantity of 2
75cm – A quantity of 3
1 metre – A quantity of 4, etc

Steam-A-Seam 2 is heat activated pressure sensitive fusible webs. This makes the web sticky and repositionable for easy placement of your applique giving you the ability to play with your design before permanently ironing.

You’ll never make a mistake – the last step is to fuse when everything is perfectly in its place! Before fusing, tack your project to a wall or try on a garment to check applique placement; you’re able to reposition pieces while you’re wearing them.

Perfect for Laura Heine Collages!

Benefits:

Repositionable stick
Bond is strong & permanent
Leave edges unfinished – will not fray or lift
Will not gum up your needle
Machine wash and dry (See Product Care)
So Easy to Use
New grid paper aids in tracing
Easy to see through and write on
Printer friendly!

To use Steam-A-Seam 2 or Lite Steam-A-Seam 2 with wool, or any dense and sensitive material, you need to iron press both the front and back of your design. If available, using a steam iron is recommended. Since the “wool” iron setting is a low temperature, you must iron press for a longer amount of time, until the Steam-A-Seam webbing is properly fused. Please use caution as it is possible to burn wool fibers – do not iron press in one area for too long. Press for 45+ seconds and let it set to cool.

Product Care

Machine wash & dry finished projects without fabric softeners or dry clean.
You may leave edges unfinished, but if you choose to sew through, make sure that the Lite Steam-A-Seam 2® is fully fused with a steam iron – 30+ sec and let set before sewing.
When laundering, avoid using fabric softener. Fabric softener chemicals erode the fusible web over time.